Top 10 Affordable 3D Scanners You can Buy Today

There are various 3D scanners available right now in the market. The total number of scanners that are getting accessible can be overpowering, particularly if you have no clue what you truly require. We’ve chosen to make things somewhat less complex for every one of you, taking a portion of the mystery out of the acquiring process.

Your main concern probably is with price. 3D scanners are expensive no doubt. We have sorted out a list which includes the cheapest 3D scanners available, not only cheapest, but which are best as well.

Matter and Form MFS1V1 3D Scanner

If you are searching for an affordable, precise, stationary 3D scanner, there are couple of items which rival the Matter and Form MFS1V1 3D Scanner. Try not to let the cost of under $575 trick you. You positively can’t examine a SUV with this gadget, but with the capacity to catch an amazing 2,000 focuses every second and sweep at resolutions of around 0.43mm, this scanner will stand its ground against some other stationary gadget available

Fuel3D Scanify Scanner

This is one of the more surprising handheld scanners. Rather than requiring a client to move the scanner around an article, this gadget works simply like your b5typical computerized camera. Utilizing pre-aligned stereo cameras with photometric imaging, clients can basically click a button and inside of a small amount of a second a 3D picture is caught. Valued at just $1,500, it’s difficult to turn out badly with this camera/scanner.

Occipital Structure Sensor

Like the 3D Systems’ iSense Scanner we have said underneath, the Structure sensor by Occipital works in a comparable manner by connecting to one’s iPad. Evaluated under $380, this scanner is one of the most affordable one. With filtering resolutions as high as 0.5mm and exactnesses of up to 4mm, this scanner is ideal for the learner and in addition those with some experience inside of the space. Clients can catch 3D symbolism at separations somewhere around 40cm and 3.5m, making this gadget unbelievably adaptable.

3D Systems’ iSense 3D Scanner

This scanner fits cozily onto your iPad, transforming its 2D camera into a completely working 3D scanner. Made in the United States, this scanner is upheld by one of the world’s biggest 3D printer producers, 3D Systems. While it might not have unbelievably high determination, this scanner is incredible for the tenderfoot. This scanner is estimated at just shy of $500.

XYZprinting Da Vinci 1.0 All-in-One 3D Printer

If you don’t have a 3D printer yet, then this is the ideal item for you. Despite the fact that the printer is not the best of value, the cost of $600 for both a 3D scanner and printer make the Da Vinci All-in-One machine an easy decision if you are a novice searching for an affordable checking and printing b7option in one.

EORA 3D Scanner

Created by three Australian business people who were disappointed with the high expenses of customary 3D scanners, they tested themselves to build up a 3D scanner with every one of the qualities found in costly models, but that would influence the current, propelled innovation of something they all as of now had in their pockets: an iPhone. The cost is as low as $330.

Cubify Sense 3D Scanner

Cubify’s Sense 3D scanner, sponsored by 3D Systems, is an extraordinary alternative for the individuals who need adaptability, convenience, and usability. This handheld powerhouse has the most flexible output range in its class, with auto-streamlined settings for articles as little as 0.2m, (for example, fine adornments) to 3 meters in all headings (a whole cruiser). It is evaluated cheaply at $399.

BQ Ciclop 3D Scanner

The cheapest in the rundown with the sticker price of $270. Some portion of BQ’s 100% open source biological community, the Ciclop is a 3D rotational laser triangulation scanner that utilizations two lasers anticipated over an item to catch its geometry and surface. Horus, BQ’s open source programming, can be utilized to align the scanner, modify the camera introduction, or perspective the point mists produced.

EinScan-S by Shining 3D

The EinScan-S versatile 3D scanner by Chinese assembling organization Shining 3D, utilizes organized light innovation and two cameras to catch 360-degree checks off of its pivoting turntable stage. As indicated by Shining 3D, EinScan-S conveys printable 3D models with high precision, perfect for inventive FDM 3D printing ventures. It will cost you $1200.

IIIDScan PrimeSense 3D Scanner

Another mid-range alternative regarding cost, $1441, the IIIDScan is novel in that it is intended for both handheld and stationary use, and in that it utilizes an exact 3D laser scanner furnished with the PrimeSense 1.09 nearer go sensor. It can examine either people or protests from a large portion of a meter to three full meters away, while keeping up a precision level of 0,5mm.

Unique Camera Stabilizer for Your Smartphone

The fight against shaky smartphone videos might come to an end today, at least that’s the vision of Rick Whang and his team at Navin. 1218 backers at Indigogo are hoping the same!

 

ProView S3 Camera Stabilizer for Smartphones

The Pro View S3 is a camera stabilizer for smartphones and a one stop solution for those who want to shoot videos like a pro! The stabilizer is specially designed for large 4K smartphones but works just as well with mid sized ones too, as the unit can handle screen sizes ranging from 4.7” up to 5.7”. It gives users the liberty of shooting ultra smooth videos. Being professionally designed, the Pro View S3 is also the world’s first 3-axis gimbal, making it the most versatile smartphone stabilizer yet. Better yet you can crowdfund it today to make this a reality!

See what Rick has for advice for other tech entrepreneurs the future of smartphone filming  and why you should fund this project!

How did you come up with this idea and what made you “go for it”?

More smartphones are equipped with high-resolution camera, even 4K camera on the latest models. As video sharing is becoming popular, good to enable everyone to take cinematic video shots like filmmakers using their smartphone to better express and share. The technology is here, just need to make it more affordable and accessible to most people.

I would say it’s a better use than the selfie stick…:) If everything goes according to plan, what’s your ultimate vision?

Make shaky video a term in history.

ProView S3 360 design view Camera Stabilizer for Smartphones

Nice! Now give us 3 tips from what you have learned on your way to other technology entrepreneurs

  • Real schedule may get 50% longer than expected.
  • Have a backup plan.
  • Seek multiple sources.

Instructions ProView S3 Camera Stabilizer for Smartphones

Finally, tell us: why should your project get funded?

We bring state of the art 3-axis gimbal technology to the market, better than what’s currently available, at an ultra-affordable price. A big step toward obliterating shaky videos!

Well, I for one do hope you succeed in your mission! Thank you Rick Whang at Navin and best of luck on your crowdfunding!

One of the Most Affordable 3D Scanners Today, Cowtechs Ciclop is Entering the Market

With allready 1400% funded at Kickstarter this projects looks promising!
 CowTech Ciclop RepRapids 3D Scanner live action
3D printing is marvelous, however if you need to duplicate a current object of yours, you have somewhat of a test before you. You can either get the opportunity to chip away at a 3D CAD program and reproduce the piece, however that requires abilities the normal customer doesn’t have. On the other hand, you can examine it. 3D Scanners can be costly, which is the reason we’re inspired with by CowTech Ciclop by Jason Smith. It’s a pack that contains nearly all that you need to make a scanner; what doesn’t accompany can be printed with your current 3D printer. Open Sourced of course!;)
How did you come up with idea of an 3D Scanner and what made you “go for it”?
Both of us were very interested in the 3D printing field and we were really looking for a way to replicate objects without creating the CAD file from scratch. 3D scanners were an obvious solution but they were all so expensive. After looking at the technology available, we ran some numbers and guessed that we could make our own 3D scannerfor a fraction of the price of existing models with just a few tweaks.
I see you have backed a lot of projects on Kickstarter, this is more then a job for you is it?
It is certainly more than a job. I love Kickstarter and the idea of being an early adopter and helping really neat projects get off the ground. I hope that with my projects I provide a platform for people to do the same thing.
Was the choice of open source easy for you and how come you choosed it?

Well, we designed the scanner from an open source project, so we did’t really have an option in terms of how we would release it. However, even if we had pioneered the technology, we would have strongly considered making it open source. I love the open source concept and the way that it accelerates technology growth and collaboration. 3D printing certainly wouldn’t be where it is today with the open source revolution within the industry.

Lion 3det copy result CowTech Ciclop 3D Scanner live actionLion Copied by Ciclop 3D Scanner

 

If everything goes according to plan, what’s your ultimate vision??

Weston and I just want to make awesome products that shatter price points and use common sense engineering. We operate with low overhead, we are savings minded, and years of growing up farming and ranching has given us loads of experience in engineering and design. We have been working on stuff and fiddling with bolts since we were young kids and that teaches you a thing or two about how to design. We know what it’s like to not be able to reach a bolt with your socket wrench, so when we design parts, we make the bolts easily accessible, for example.

 

Give us 3 tips from what you have learned on your way to other technology entrepreneurs?

The first is that you have more skills than you think, and don’t be afraid to utilize them. Time is your greatest enemy, and sometimes there just isn’t enough to get everything done without outsourcing labor, but if you can do it yourself, don’t be afraid to do so. It doesn’t take a professional graphic designer to make a logo, or a webmaster to create a website. There are increasingly more and more tools that are oriented towards doing these types of things yourself, starting with little to no experience, and they can be great resources.
Second, if you are launching a Kickstarter, make sure you work out as many kinks as possible before you launch your product. Having a prototype and a product that is production ready are literally worlds apart. Do as much part sourcing and final design work as you can, because the littlest tweaks that are necessary to go from prototype to product can be surprisingly expensive.

Finally, there are so many resources online in forums and groups where people are willing and happy to help you out with any questions you have from engineering to software to marketing. They are a really valuable resource to assist in areas where you may not have the expertise or just need help working out a bug.

Finally, tell us: why should your project get funded?

Well, as of this printing, we are already nearly 1400% funded, so there has clearly been a huge demand. However, we stand for more than just producing an affordable product. We are trying to revolutionize the 3D scanning scene. The 3D printer revolution has already come and now is time for the scanner revolution. We wanted to get open source scanners in the hands of as many makers as possible, and we hope that together the project can evolve and improve to totally change the face of 3D scanning.

 

Already 1400%, that’s amazing! I was going to end this interview with a “good luck” but clearly that’s not necessary in this case! CowTech will go far with this one! Now get your own Ciclop and back this 3D Scanning Project!

Big Thanks to Jason Smith at CowTech, best wishes!

Sweep, a Scanning LIDAR-Light Detection And Ranging Campain You Can Crowdfund Today

Sweep Scanning LiDAR 360 degree on a drone!

The Sweep is a plotting technology that measures space by illuminating a target with a laser. The light weight, 360 degrees operating and the affordable price makes it functional in many different areas. It is built using Sculpteo 3D printing technology and with the ability to make high resolution maps you get applications in atmospheric physics, geography, archeology, forestry and many more!

And of course you can put it on your drone…:)

Sweep lidar on a flying drone

Now see what the inventor has to say and go get your own and Crowdfund this campaign!

How did you come up with this idea and what made you “go for it”?

We have been working on scanning LiDAR solutions for several years. We started off developing outdoor consumer robots for the home. To do any kind of mapping, scanning LiDAR or something like it is required. When they discovered that there were no affordable LiDAR sensors on the market that could work outdoors, they set out to make one themselves.

I can see many implementation areas for the Sweep, for instance for firefighter drones in burning buildings with low visibility. Can Sweep operate in smoky environments? What other usages do you see?

Sweep uses infrared light to sense its surrounding, which does a good job of penetrating fog and some smoke.  What makes Sweep more capable than most LiDAR sensors is the filtering technique it uses to differentiate returning pulses from noise, much like a checksum. This allows it to work well in fully sunlit environments, or next to other sensors using similar wavelength light.  Sweep can be an excellent navigation sensor in almost any vehicle.  From ground robots, to boats to small planes, sweep can provide a better understanding of the surroundings and warn of approaching obstacles.
sweep_underside

In your Kickstarter video you are using a Raspberry Pi and their 3:rd version is coming out soon, will that enhance the experience of Sweep?

The Raspberry Pi 2 has no problem running our example projects. That being said, having more processing power is always helpful if you’re running additional programs concurrently.

And if everything goes according to plan, what’s your ultimate vision??

We’re targeting the initial release of Sweep toward early adopters and developers looking to try out the technology.  As we get more insight from our customers about their specific applications, we will refine future versions of Sweep to meet the demand.  Likely areas of improvement include additional internal data filtering modes, more compact packaging, faster update rates, longer ranging capability and more environmental hardening. The ultimate goal of Sweep is to empower new and existing applications with a smart and affordable scanning LiDAR solution.

Give us 3 tips from what you have learned on your way to other technology entrepreneurs?

Number one is make sure you start advertising for your campaign 1-2 months early.  It takes time for news agencies to write articles and reviewers to test your product.

Second is if you are making a hardware product, make sure you have your supply chain mapped out before the campaign.  This means getting quotes for predicted quantities of every last item going into your product, as well as assembly costs.  A miscalculation of the product’s part costs will sink any project.

Finally, find a message for your campaign that resonates with your target audience.  A good message about what it is you’re trying to accomplish can go a long way toward selling your product.


Finally, tell us: why should your project get funded?

Making scanning LiDAR more affordable and as a result more accessible has been our goal from the beginning. We’ve gone a step further by doing more than just lowering the cost, we’ve made the sensor itself smarter by processing data internally and outputting more useful and application specific data. We strongly believe that Sweep will enable many exciting new applications that weren’t possible before because of cost or processing requirements.

So, go get your own Sweep and support this tech Kickstarter project!

Thank You Kent Williams inventor of Sweep at Scanse.io for taking the time and the great tips to other tech inventors out there!

 

Robots That will kickstart your Kids Coding Skills in A Fun way

 

It is quite clear that technology

based in good coding, can help solve the critical problems that we as a human race experience. We can all appreciate the emergence of technology especially the computers and systems. With such advancements we have been able to offer solutions to millions of problems in our world including the outer-space.
It is obvious that programming is the co-pillar of all the systems that have ever been designed, and program coders play a very important role in our society in regards to problem solving.

Though coding is deemed as one of the technical subjects in programming, research shows that early practice makes perfect coders. It is evident that most people start to learn about coding at an older stage an in essence; they have a difficult time grasping the concepts used in making good programs.

Playtime just got smarter Kamibot

What should be done to increase the quality of coders in our society?

As parents and teachers of the next generation, we should put more focus on getting the kids in to the programming environment at an early stage.

How can this vision be best achieved?

Well, for some time now it was almost impossible to think of getting kids to start learning of how to code at their playful age. Thanks to Kamibot, a robot that can effectively teach kids on how to code our vision for teaching kids in an interesting way is 99.9% viable.

 

Kamibot is a unique programmable paper-craft robot

that the kids will love to play with and can customize it with codes and colourful skins. The basic principle of the design of Kamibot is to provide a fun way of engaging kids into programming.

Kamibots start with having fun

The Kamibot company was founded in the year 2014, and they technology has already been tested and approved by teachers and parents as the best means of teaching the young generation to code easily.

What are the Benefits of Kamibot to kids?

Nowadays, it is quite easy to find kids engaging in extracurricular activities that that has little or no potential benefit to their eventual life. Kamibot offers a more suitable way of engaging your kids in a productive manner that will eventually lead them to a more promising future where they get to help solve bigger problems by programming in the real world. Other benefits include;

  • The kid gets occupied playing with Kamibot codes and avid doing silly stuff
  • The kid develops more interest in codes and programming in general; positive attitude.

Kamibot Blue Army Tank

While we keep saying that attitude matters in whatever we want to learn, we can’t really expect people to change their attitude about programmable coding just by themselves. Everything will depend on how one is presented the subject. 

Kamibot has just started out; it is definitely a game changer. I bet it will play a very important role in shaping up future generation programmers. While the world is revolutionising for a better future; give your kids a better chance by teaching them how to code, make use of the Kamibot technology and support their Kickstarter Campaign!

Here is what the inventor has to say about the future on the question of their visions:

  •  Well obviously, we want to start the next robot apocalypse i.e. skynet with papercrafts. And it’s not to far off, especially when you see what Google is doing with AlphaGo. All kidding aside, we want to make papercraft robots that kids can get into and learn programming from. Something that kids can constantly change and customize and relate to.

 

Give us 3 tips you have learned on your way to other future tech entrepreneurs?

  • I’m not good with giving tips, since I’m the kind of guy who is always looking for them myself. So I could share some stuff I’ve picked up along the way. 1. Don’t ignore the people who you are making the product for. 2. Don’t wait till you have traction to start building bridges with investors. 3. Stuff never goes the way you plan 99% of the time (from my experience). And when stuff actually goes according to plan it feels a bit cheap. So you have to be very adaptable.

 

Finally, tell us: why should your project get funded?

  • Funding the project not only supports us but also supports fun and engaging coding education for kids. Bill Gates recently did an AMA on reddit and this is what he had to say, “I agree that our schools have not improved as much as we want them to. There are a lot of great teachers but we don’t do enough to figure out what they do so well and make sure others benefit from that. Most teachers get very little feedback about what they do well and what they need to improve including tools that let them see what the exemplars are doing. Technology is starting to improve education. Unfortunately so far it is mostly the motivated students who have benefited from it. I think we will get tools like personalized learning to all students in the next decade.
  • A lot of the issue is helping kids stay engaged. If they don’t feel the material is relevant or they don’t have a sense of their own ability they can check out too easily. The technology has not done enough to help with this yet.”

    We want to help get kids engaged through relevant characters that the kids might see on their screens. Kids don’t care about printing “Hello World” on their screens. But I promise you that any kid would care about being able to get his favorite character to move or react through code.

Big thanks to Asaph Kim at Kamibot
Kamibot Facebook
Kamibot Twitter

The Perfect Drone For Your Kids, They Have Fun AND Learn How To Code

– An Interview with the code teaching Robolink, creator of the codeable CoDrone!

I have seen some projects to make kids want to code more, but never have I seen a more direct reward for doing so: controlling your own drone!
Check out this crowdfunding project and get your own CoDrone now, only 48 H left!:D

Transformer Drone and RC car you can code!

Does this give kids more motivation to do so?
Yes, we’ve been teaching students how to code, and when things started flying with students’ own code. Students were having 10 times more fun with that and got engaged!

How did your team meet up and why is teaching to code important for you guys?
Learning how to code should be emphasized as people learning English or math. We enjoy teaching kids and we love contributing to the World. Our team have been working on other robotics project before and formed a company to create educational robotics kits.

d239af8ee020828c4343da1b63fb547e_original

Can you see your technology being used in other situations say, for firefighters, avalanche victim finders or similar?
Yes, our students are already doing simulation of such situation and if they have proper tools (such as drones
that are stronger so they can carry more payload and longer lasting flight time) then they can apply the drones to those disaster situation to help people.

That sounds really good. Hope they can be of great help! It is now six days left of your fund raising campaign and you have all ready tripled your goal. That’s amazing! Why is that you think and what does this mean for Robolinks future endeavors?
This will be only the beginning to spread drone education to every school in the US.

Tech Specs for the CoDrone


And to the rest of the world I hope! So, if everything goes according to plan, what’s your ultimate vision?

We would like to share this great kit with every kid in the US, which is a huge vision for a small startup like us. But we have an amazing start now!

For sure, your funding is allready three times the budget! Give us 3 tips you have learned on your way to other future tech entrepreneurs?
Start in small scale.
Make a MVP (Minimal Viable Product) and test in your local community.
Do something you enjoy, because running a tech startup is very hard.

Transformation of the drone into RC Racing car

I usually ask as a last question why your project should get funded, but in this case it’s not necessary… Maybe some final words where you can promote the CoDrone, Robolink or just code teaching in general?
We’ve been engaging students how to code for a long time, and this have been the best way to engage students on how to code in a very fun way. We also made the curriculum very easy, so that instructors without techy background could utilize our tools to teach students as well.The Robolink Community

It’s like the Khan-academy meeting some very affordable drones.

So fund their Crowdfunding Project and help spread the word about this coding revolution opportunity!:)